行业标准规范英汉对照-工艺装备(3)

179 GB/T 4678.11-1984 压铸模零件 推杆 Die-cast die components--Ejector pins

180 GB/T 4678.12-1984 压铸模零件 复位杆 Die-cast die components--Return pins

181 GB/T 4678.13-1984 压铸模零件 推板垫圈 Die-cast die components--Ejector plate washers

182 GB/T 4678.14-1984 压铸模零件 限位钉 Die-cast die components--Stop pins

183 GB/T 4678.15-1984 压铸模零件 垫块 Die-cast die components--Spacer blocks

184 GB/T 4679-1984 压铸模零件技术条件 Specification of the die-cast die components

185 GB/T 4755-1984 扭簧比较仪 Microkator

186 GB/T 5102-1985 渐开线花键拉刀技术条件 Broaches for involute spline technical specifications

187 GB/T 5103-1985 渐开线花键滚刀通用技术条件 The general technical specifications for involute splines hobs

188 GB/T 5104-1985 30°压力角渐开线花键滚刀基本型式和尺寸 The basic types and dimensions of hobs for 30°pressure angle involute splines

189 GB/T 5105-1985 45°压力角渐开线花键滚刀基本型式和尺寸 The basic types and dimensions of hobs for 45°pressure angle involute splines

190 GB/T 5106-1985 圆柱直齿渐开线花键量规 Gauges for straight cylindrical involute splines

191 GB/T 5305-1985 手工具包装、标志、运输与贮存 Packaging,marking,transportation and storage of hand tools

192 GB/T 5340-1985 可转位立铣刀 Endmilling cutters with indexable inserts

193 GB/T 5341-1985 可转位三面刃铣刀 Side and facemilling cutters with indexable inserts

194 GB/T 5342-1985 可转位面铣刀 Facemilling cutters with indexable inserts

195 GB/T 5343.1-1993 可转位车刀及刀夹型号表示规则 Turning toolholders and cartridges for indexable inserts--Designation

196 GB/T 5343.2-1993 可转位车刀型式尺寸和技术条件 Turning tools with indexable inserts--Types,dimensions and technical specifications

197 GB/T 5344-1985 普通磨料微粉粒度沉降管测定方法 Sedimentation tube testing method of conventional abrasive microgrits

198 GB/T 5388-1985 链锯 导板 Chain saw--Guide bar

199 GB/T 5389-1985 链锯 锯链 Chain saws--Saw chain

200 GB/T 5391-1985 油锯 台架试验方法 Gasoline powered chain saws--Bench test methods