塑胶电镀介绍 Plating on Plastics
塑胶电镀原理及注意事项Principles of Plating on Plastic
第一站 素材选择 ABS塑料案例(Step 1:Selecting Material ABS Plastic Case)
1.最好採用电镀级ABS塑胶如图所示其丁二烯含量15%~16% 密着强度最好Selects the ABS plastics showing on the right which the butadiene is 15%-16%.Its adhesion is best.
2.采用70%~95%PC+ABS材料要请供应商提供防火材料%、 PC%、等相关资料 Applier should offer fireproof material, PC%,etc,and references before selecting 70%-95%PC+ABS.
3.塑胶电镀原料应完全干燥(含水率0.1%以下) Materials of plating on plastic should be dried totally.
4.塑胶电镀原料尽量避免染色 Materials of plating on plastic must prevent dyeing.
.塑胶电镀原料UL认证 Materials of plating on plastic should be attested by UL
